Heating

Maximum output for district heating, industry, commercial construction or process heat. The advantages of this hot water supply are, on the one hand, the compact lightweight construction and the connection via the mobile connection lines to the ventilation units or end consumers. Thanks to the simple modular design, several systems can be connected together. The equipment in this output size can be adapted to your specific needs. All units are equipped with GSM-based remote maintenance technology. Burner technology - oil blower burner according to EN 267. Incl. drip pan under burner unit. Container walls non-combustible, F30 equipped.

The stationary oil heaters are stationary, Direct-fired warm air heaters (WLE) with heat exchanger and flue gas connection. The units can be fired with EL heating oil and diesel fuel. These units are designed exclusively for operation with separate forced-air burners in 1-stage operation and from the VRS 75-1 with 2-stage operation.

The HTL series in stainless steel design is unsurpassed in quality and performance. The HTL central heating units fulfil all wishes. From the stainless steel design to the technically high-quality special radial fans. Even with oversized hot air hose lengths, these units never run out of breath. As a compact version, the unit with tank and integrated tank heating is installed in a winter-proof container.

Particularly environmentally friendly are our Econ hot-air heaters, which save up to 40% of heating oil by using special recirculation technology. All units are equipped with GSM-based remote maintenance technology. The ECON 300xS2 heater features an electronic soft start and a two-stage burner. This has the advantage that, in addition to a stronger nominal heat output, a high air output is also available.

Particularly powerful and as a combi unit compact with tank, integrated tank heater installed winterproof in a container. The heater convinces with high pressure and is very well suited for use with heat distribution hose.

Particularly environmentally friendly are our Econ hot-air heaters, which save up to 40 % of fuel oil by using special recirculation technology. All units are equipped with GSM-based remote maintenance technology. The unit is mounted on a mobile base frame so that rapid deployment is guaranteed at all times.

The automatic heaters of the CLK series bring the necessary heat to the desired locations in the event of a sudden cold snap. The mobile units can easily be brought to your place at the desired operating time to provide immediate heat without lead time when needed. The units of the CLK series can be described as real powerhouses without exaggeration. They are powerful, mobile automatic heaters with specially optimised sickle fans. Powerful with high air volume for connection to direct injection. Simple operation with on/off switch.

Fascinating, modern and slim design. All our electric radiant heaters are suitable for indoor and outdoor areas such as gardens, patios, balconies, smoking areas or garages. Protected with a heavy-duty, all-weather powder coating and robustly built in all-metal construction, they are suitable for both domestic and commercial use in pubs, restaurants and hotels. All heaters operate on 220 volts and heat with patented carbon fibre heating rods, which significantly reduce operating costs compared to other heating systems. Carbon heating rods: Instant heat with two heating levels 1,480 W / 2,960 W. The elements are replaceable and designed for a long service life. Effective heating surface 4.00 m - 5.00 m with 110 degree radiation angle.

Energy Saving Sway Gas Infrared Dark field radiator. High-performance burner, standard, 1-stage, heat output 39 kW, radiation factor DIN EN 416-2: 57.8 % with ceramic burner plate for even heat distribution and NOx reduction. Long laminar flame for even heat distribution in the steel tube, safety valve, combination gas solenoid valve. Heat regulation thermostat with on/off function.

Robust solution for permanent heating in the construction and rental sector As a tried and tested classic, the TDE 95 impresses in every respect with its remarkable charisma. Designed for trouble-free continuous use, this electric heater generates up to 1,500 cubic metres of clean warm air hour after hour, which can be transported even over long distances via a connectable air hose if required. Due to its high, three-stage adjustable heating power, even large rooms can be heated quickly with the TDE 95, which also does not need to be ventilated, as no oxygen is consumed during electric heating with the TDE 95. Its large-volume, condensation-free heat makes this robust electric heater the optimal support device for dehumidifiers to accelerate building dehumidification.

20,000 m3/h frequency-controlled ventilation unit with a pressure of up to 400 Pa. Particularly suitable for cooling storage rooms, air-conditioning of events and machine cooling. Air distribution by means of flexible air hoses 4 x 500 mm. Individual outlets can be closed. A wide range of accessories is available as an option. The unit is equipped with GSM-based remote maintenance technology.

Simply incorrigible For more than two decades, this extremely robust electric heater has been the long-term proven heating solution for clean heat on construction sites, in workshops and construction containers or sales, storage and exhibition rooms. The double-walled construction of the TDE 25 reliably prevents the outer jacket from heating up. Without any radiation losses, the powerful axial fan can discharge the heat into the room and direct the hot air stream through the galvanised air outlet grille - if necessary, also by means of a connectable hot air hose into areas up to seven metres away from the heater, which do not need to be ventilated as no oxygen is consumed during electric heating with the TDE 25. Its high operational reliability, long service life and trouble-free continuous operation make the plug-in TDE 25 the first choice for rental professionals and all users who need a virtually indestructible heating solution in an easily transportable compact format.

The fast spot heating for indoors and outdoors. The automatic heaters of the REMKO PGM and PGT series are designed for trouble-free and reliable all-round use. For craftsmen on the building site, the workplace in well-ventilated workshops, for farmers and gardeners. Even lighter, even easier to handle and with improved technology in portable or mobile versions. Without exhaust gas losses, these units can be used wherever rapid spot heating outdoors or effective instant heat in closed, but then well-ventilated rooms is desired.

The fast spot heating for indoors and outdoors. The automatic heaters of the REMKO PGM and PGT series are designed for trouble-free and reliable all-round use. For craftsmen on the building site, the workplace in well-ventilated workshops, for farmers and gardeners. Even lighter, even easier to handle and with improved technology in portable or mobile versions. Without flue gas losses, these units can be used wherever rapid spot heating outdoors or effective instant heat in closed, but then well-ventilated rooms is desired.

Fast, effective heat everywhere, where it is needed Robust, safe and reliable are the transportable REMKO electric heaters. The heating power of 2 to 18 kW is adjustable in three stages. No power losses, the entire power is converted into heat. Due to the low weight and compact design, the units can be used universally. When connected to a room thermostat, a constant temperature is achieved with surprisingly economical power consumption.